Results 1 to 8 of 8

Thread: 84 phazer carb removal

  1. #1
    Member Mini
    Join Date
    Dec 2009
    My Sled
    84 Phazer
    Location
    GR MI
    Posts
    57


    Default 84 phazer carb removal

    Ok guys I need to rebuild my fuel pump, run some new lines and clean my carbs. Do you think I can get anything out of this engine compartment?!?! What a mess. Anyway can someone tell me what I am missing here.

    I first removed the secondary, then loosened the clamps on the airbox side of the carbs. I pulled the little access cover and removed the bolts holding the airbox in. Now the airbox is loose and I can wiggle it around a bit but won't come out. It appears there is an intake tube that is attached to the airbox and the steering column runs between the box and this tube. I can't believe I would have to tear the entire steering column apart just to clean the carbs and get to the fuel pump. Does this tube come out somehow? I now realize why people don't put airboxes back in these things Thanks in advance guys.

  2. #2
    Senior Member ProStock ramblnman's Avatar
    Join Date
    Jan 2007
    My Sled
    yamaha
    Location
    maine
    Posts
    532


    Default

    also undo the carbs from the intake manifolds ,pull them from them.(more wiggle room) now you should be able to remove it. it is still tight but you will get it out
    2 1997 yamaha vmax4 800
    1996 yamaha vmax4 800
    1995 yamaha vmax4 800st
    1987 yamaha exciter 570
    1978 yamaha srx440b

  3. #3
    Member Mini
    Join Date
    Dec 2009
    My Sled
    84 Phazer
    Location
    GR MI
    Posts
    57


    Default

    Thanks ramblnman. I have the carbs loose from the intake boots and I also unbolted the intake boots from the motor thinking I could slide them up and out and well you know how far that went. Any clue about that part of the airbox the steering column goes through?

  4. #4
    Member Mini
    Join Date
    Oct 2004
    My Sled
    Yamaha Phazer
    Location
    UP Michigan
    Posts
    31


    Default

    yes the air intake tube comes out. You need to turn the tube clockwise or counterclock wise (not sure which) to pull it out. The box should come out then.

  5. #5
    Member Mini Fardoche's Avatar
    Join Date
    Dec 2004
    My Sled
    2 strokes
    Location
    Canada
    Posts
    80


    Default airbox

    The end of the intake tube comes off, you'll see a little tab on the airbox.
    Easiest way I found was to take the tube off, remove the boot clamps then the boots (between carbs and airbox), and then wiggle the airbox out. Try pulling on the steering gate (above footrest) to get enough space for the metal thing on the airbox to clear.

  6. #6
    Member Mini
    Join Date
    Dec 2009
    My Sled
    84 Phazer
    Location
    GR MI
    Posts
    57


    Default

    Looks like I need to pull the oil tank to get my hands in there. Oh well, I want to replace all the lines anyway. Can't believe how difficult it is to get to the carbs on these things. Anyone ever relocate the fuel pump on these for easier access?

  7. #7
    Member Mini
    Join Date
    Dec 2009
    My Sled
    84 Phazer
    Location
    GR MI
    Posts
    57


    Default

    Thanks for all the help guys. I pulled the oil tank, pulled off the intake tube and was able to wedge the airbox out. WOW is that a tight fit. Now just a quick question on the oil lines from the pump to the intake boots, are they just regular fuel line or something else? Mine are kinda stiff and I don't want them to crack and burn down my motor. Might as well replace them now that I am in there. Thanks

  8. #8
    Member Mini
    Join Date
    Dec 2009
    My Sled
    84 Phazer
    Location
    GR MI
    Posts
    57


    Default

    Found my issue last night. The float pin on the mag side was halfway out. So the float could wander around where ever it wanted. How do I prevent this from happening again? Can I just use a tapered style pin like a round slide uses?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •